Wednesday, April 6, 2016

R2-Q5 Electronics

I've been working on this droid alot lately but haven't blogged my progress in a while.

My old batteries which barely got used were old and died. So I have new batteries and I've made my own electronics board out of 12x12 inch by 1/4 inch thick aluminum.

 The panel has holes that I have 1/4 inch hand studs that attach to some L brackets mounted on the frame. I can in about 1 minute unscrew the 3 bolts and unplug main power then disconnect and take all of it out if I need to.

I took some photos of the switch settings on the motor controls for future reference.

No comments:

Post a Comment